Yazar "Kolat, Veli Serkan" seçeneğine göre listele

Listeleniyor 1 - 3 / 3
  • Küçük Resim Yok
    Öğe
    Fabrication of a Portable Magnetic Microcantilever Using Fe40Ni38Mo4B18 Amorphous Ribbon and Its Application as a Humidity Sensor by Coating with TiO2 Nanotubes
    (Mdpi, 2024) Atalay, Selcuk; Erdemoglu, Sema; Yilmaz, Hatice Caglar; Mete, Emine; Inan, Orhan Orcun; Kolat, Veli Serkan
    Microcantilevers (MCs) are highly sensitive sensors capable of detecting mass changes on the surface at the nanogram and even picogram scale. In this study, microcantilevers were fabricated for the first time using the Sodick AP250L Wire electrical discharge machining (EDM) from amorphous 2826MB (Fe40Ni38Mo4B18) ferromagnetic ribbons. This method is advantageous because it allows for the simultaneous production of a large number of microcantilevers, with about 100 MCs being produced in a single manufacturing process. Additionally, a straightforward and cost-effective measurement system was developed to measure the resonance frequency and frequency shift of the MC entirely through magnetic means, a technique not previously reported in the literature. To evaluate the performance of the MC, we employed it as a humidity sensor. For the TiO2-NT-coated MC, a frequency shift of approximately 202 Hz was observed when the humidity level changed from 5% to 95% relative humidity (RH).
  • Küçük Resim Yok
    Öğe
    Fabrication of a Portable Magnetic Microcantilever Using Fe40Ni38Mo4B18 Amorphous Ribbon and Its Application as a Humidity Sensor by Coating with TiO2 Nanotubes (vol 10, 98, 2024)
    (Mdpi, 2025) Atalay, Selcuk; Erdemoglu, Sema; Yilmaz, Hatice Caglar; Mete, Emine; Inan, Orhan Orcun; Kolat, Veli Serkan
    [Abstract Not Available]
  • Küçük Resim
    Öğe
    A Rapid Response Humidity Sensor for Monitoring Human Respiration with TiO2-Based Nanotubes as a Sensing Layer
    (The Minerals, Metals & Materials Society, 2020) Atalay, Selçuk; Erdemoğlu, Sema; Kolat, Veli Serkan; İzgi, Tekin; Akgeyik, Emrah; Çağlar Yılmaz, Hatice; Kaya, Harun; Ersoy Atalay, Funda
    The use of TiO2-based samples with nanotube (NT) shape for humidity sensing has been investigated. Sample characterization was carried out using x-ray diffraction analysis, scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy. x-Ray diffraction analysis showed that the nanotubes had TiO2, NaO3, and H2Ti2O5 phases. SEM revealed that the NTs had diameters ranging from 20 nm to 200 nm and very different lengths. TiO2-based nanotubes were coated using the drop-casting method onto a quartz crystal microbalance (QCM). The synthesis of TiO2-based NTs was performed using a hydrothermal process. Humidity sensing measurements showed that the resonant frequency of TiO2-based NTs deposited onto the QCM was very sensitive to humidity changes. It was also shown that the sensor could be used for respiratory monitoring purposes.