Mechanical characterization of lattice structure produced by additive manufacturing under torsion and compression

Basit Öğe Kaydı
dc.contributor.authorAkbay, Özgün Ceren
dc.contributor.authorÖzdemir, Burak
dc.contributor.authorBahçe, Erkan
dc.contributor.authorEmir, Ender
dc.contributor.authorUslu Uysal, Mine
dc.date.accessioned2026-06-19T06:31:57Z
dc.date.available2026-06-19T06:31:57Z
dc.date.issued2024
dc.departmentMalatya Turgut Özal Üniversitesi
dc.description.abstractIn the present paper, the torsion and compression behaviors of lattice structures were studied. The PLA (Polylactic Acid) materials were used in assembly and produced by additive manufacturing method. The structure and lattice behaviors were investigated by Digital Image Correlation (DIC) system during experimental study. Models created using three different unit cell model as Trunch Octa Dense, Trunch Octa Light, Body Diagonals With Nodes and two different, 70 mm and 140 mm, total length size. The influence of the unit cell model, cell size on the strength of the structure were studied by compression and torsion experiments. The maximum compressive stress and maximum torsion were obtained and their deformations were presented. The highest maximum torque was determined in Body Diagonals With Nodes cell model and 140 mm due to the fact that the cell model structure compatible with torsion. The highest compressive stress was determined in Trunch Octa Light cell model and 140 mm cell length. © The Author(s) 2023.
dc.identifier.doi10.1177/0021955X231224775
dc.identifier.endpage22
dc.identifier.issn0021-955X
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85180852831
dc.identifier.scopusqualityQ2
dc.identifier.startpage3
dc.identifier.urihttps://doi.org/10.1177/0021955X231224775
dc.identifier.urihttps://hdl.handle.net/20.500.12899/4892
dc.identifier.volume60
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSAGE Publications Ltd
dc.relation.ispartofJournal of Cellular Plastics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_Scopus_20260612
dc.subject3D Manufacturing
dc.subjectCompression Test
dc.subjectDigital Image Processing
dc.subjectTorsion Behavior
dc.titleMechanical characterization of lattice structure produced by additive manufacturing under torsion and compression
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu