Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites

Basit Öğe Kaydı
dc.contributor.authorOzdemir, Burak
dc.contributor.authorYardimeden, Ahmet
dc.contributor.authorBahce, Erkan
dc.contributor.authorKilickap, Erol
dc.contributor.authorEmir, Ender
dc.date.accessioned2026-06-19T06:39:28Z
dc.date.available2026-06-19T06:39:28Z
dc.date.issued2023
dc.departmentMalatya Turgut Özal Üniversitesi
dc.description.abstractIn the study, Natural jute composite materials, which have environmental advantages due to their easily degradable nature were drilled with different processing parameters and the effects of thrust force, vibration and temperature changes on hole quality were investigated. The effect of feed and spindle speed was statistically analyzed using ANOVA method. The thrust force, vibration and temperature factors that occur depending on the drilling parameters vary and affect the roughness and delamination values. The effect of feed and speed on thrust force was calculated as 97.87% and the feed effect (90.85%) is far greater than the speed (9.15%). The effect of drilling parameters on vibration is statistically insignificant due to the different spread behavior in the layers of the composite material (R2 = 0.2329). However, feed effect on vibration (94.6%) is greater than the speed effect (6.06%). The temperature is affected by 96.93% of the drilling parameters and the speed is 84.16% and the feed is 15.83%. The roughness effect depending on the drilling parameters is measured as 84.91%. The effect of speed on roughness (90.26%) is greater than the feed (9.73%). It has been determined that this situation is mostly related to vibration and temperature.
dc.identifier.doi10.1080/15440478.2022.2159608
dc.identifier.issn1544-0478
dc.identifier.issn1544-046X
dc.identifier.issue1
dc.identifier.orcid0000-0002-5870-0398
dc.identifier.orcid0000-0003-4972-5064
dc.identifier.orcid0000-0001-5389-5571
dc.identifier.orcid0000-0003-2776-1195
dc.identifier.scopus2-s2.0-85145254903
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1080/15440478.2022.2159608
dc.identifier.urihttps://hdl.handle.net/20.500.12899/5627
dc.identifier.volume20
dc.identifier.wosWOS:000904662700001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Inc
dc.relation.ispartofJournal of Natural Fibers
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WOS_20260612
dc.subjectDrilling
dc.subjectSurface Roughness
dc.subjectDelamination Factor
dc.subjectThrust Force
dc.subjectVibration
dc.subjectDrill Temperature
dc.titleAnalysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu