Optimization of parameters for drilling composite materials with freeform surfaces

Basit Öğe Kaydı
dc.contributor.authorOzdemir, Burak
dc.contributor.authorKilickap, Erol
dc.contributor.authorBahce, Erkan
dc.contributor.authorYardimeden, Ahmet
dc.contributor.authorEmir, Ender
dc.date.accessioned2026-06-19T06:39:32Z
dc.date.available2026-06-19T06:39:32Z
dc.date.issued2024
dc.departmentMalatya Turgut Özal Üniversitesi
dc.description.abstractIn the drilling process, the angle of surface is one of the parameters that affect hole quality. In study, the effects of feed rate, spindle speed and surface angle on the thrust force, roughness, and delamination, which are the factors affecting the quality of hole, were investigated in the drilling of GFRP (glass fiber reinforced polymer) and CFRP (carbon fiber reinforced polymer) with freeform surfaces. With ANOVA (Analysis of Variance) and regression analysis, the parameter effects were statistically compared, and descriptive mathematical models were derived. The mathematical models were subjected to the Genetic Algorithm approach according to the different surface angles determined and the optimum parameter values were calculated. Guiding data were obtained about the effects of machining on hole quality in drilling composite at different surface angles, which is the main motivation of the study. Optimization results will improve hole quality on curved surfaces, while saving cost and time.
dc.identifier.doi10.1080/10426914.2023.2187826
dc.identifier.endpage68
dc.identifier.issn1042-6914
dc.identifier.issn1532-2475
dc.identifier.issue1
dc.identifier.orcid0000-0001-5389-5571
dc.identifier.orcid0000-0002-5870-0398
dc.identifier.orcid0000-0003-4972-5064
dc.identifier.orcid0000-0003-2776-1195
dc.identifier.scopus2-s2.0-85150639136
dc.identifier.scopusqualityQ1
dc.identifier.startpage55
dc.identifier.urihttps://doi.org/10.1080/10426914.2023.2187826
dc.identifier.urihttps://hdl.handle.net/20.500.12899/5645
dc.identifier.volume39
dc.identifier.wosWOS:000946818900001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Inc
dc.relation.ispartofMaterials and Manufacturing Processes
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20260612
dc.subjectGfrp
dc.subjectCfrp
dc.subjectFreeform
dc.subjectDrilling
dc.subjectGenetic
dc.subjectAlgorithm
dc.titleOptimization of parameters for drilling composite materials with freeform surfaces
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu